Telindus 1132 - IP Filters

TELINDUS 1132/1133 Web Interface User’s Guide
Version 2.0 Page 34/57 December 2004
The Apply button will temporarily save these settings. To make the change permanent, you need
to click on Save All Settings. At the System Commands page under the TOOLS, click on Save
All.
4.6.8 IP Filters
IP filters allow to configure the Firewall to block all or specific types of IP traffic. See Figure 23 (IP
Filters). It is also possible to build Custom IP Filters.
Figure 23 (IP Filters)
The Apply button will temporarily save these settings. To make the change permanent, you need
to click on Save All Settings. At the System Commands page under the TOOLS, click on Save
All.