TELINDUS 1132/1133 Web Interface User’s Guide
Version 2.0 Page 5/57 December 2004
• PPP Dial on Demand
• Universal Plug and Play Support
WLAN Support
• IEEE 802.11, 802.11B and 802.11G compliant
• Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm)
standard
•
Supports 802.11b and 802.11g simultaneously
• Support Direct Sequence Spread Spectrum (DSSS) technology
• Operating Range of >300 Meters (Open Air)
• WEP security, WPA security or 802.1X security
Management Support
• Web Based HTTP management GUI
• TFTP/FTP Support for Firmware Upgrade
• Web Based Firmware Upgrade (Local)
• Soft Factory Reset Button via Web GUI
• Diagnostic Test (DSL, OAM, Network, Ping Test)
• Telnet/CLI (Read Only)
• Syslog Support
• Firmware upgrade-able for future feature enhancement
Security Support
• NAT for basic Firewall support
• Packet Filtering Firewall Support
• Stateful Packet Inspection Support
• IP Flters
• Bridge Filters (up to 20 Rules)
• Protection against Denial of Service attacks
• Password Authentication to Modem
External Connectors:
• 1 x RJ-11 Telephone socket for ADSL line
• 4 x RJ45 for 10/100Base-T Ethernet (MDI-X)
• 1 x USB 1.1 Type B
• 1 x DC Jack for Power Input
• 1 x Factory Default Reset Button
• 1 x On/Off Power Switch
• 1 x Co-axial Connector for Detachable 180 degree Rotate-able 2.4Ghz 3 dBi Antenna
Platform Support:
• Windows 98SE
• Windows ME
• Windows 2000
• Windows XP
• Windows 2003
To Next Page
Loading...