Telit Wireless Solutions LE910C series - Installing the Telit AT Controller (TATC)

LE910Cx-WE866Cx LTE Bundling User Guide
1VV0301578 Rev. 9 Page 24 of 56 2020-05-26
Figure 5-7 WHQLDriversx64 Installation Completed
9. Upon successful software installation, following devices will be listed under Device
Manager.
Figure 5-8 Installed Devices List in Device Manager
5.3. Installing TATC Tool
1. Go to URL: https://www.telit.com/evkevb-drivers/ and download the Telit TATC tool
package as shown below.
Note: The Telit TATC package consist of:
• Telit AT Controller.Ink
• Xfp.Ink