Telit Wireless Solutions LE910C series - Configuring the WE866 Cx Module; Selecting the COM Port

LE910Cx-WE866Cx LTE Bundling User Guide
1VV0301578 Rev. 9 Page 33 of 56 2020-05-26
5.5. Configuring WE866Cx Module
1. Assuming all settings are set properly, you should be able to communicate with the
module. The Telit AT Controller can be used to read or modify the configuration
settings.
Figure 5-25 Telit AT Controller Main Menu
2. Click the Settings button to select the COM port (Telit USB modem) assigned to
the module.
Figure 5-26 Select COM Port