Telit Wireless Solutions LE910C1-AP User Manual

LE910C1 Hardware User Guide
1VV0301298 Rev. 1.08 - 2017-11-14
Reproduction forbidden without written authorization by Telit Communications S.p.A. - All Rights Reserved
Telit Confidential Information, provided under NDA Page
51 of 119
NOTE:
Active low signals are labeled with a name that ends with "#" or with “_N”
NOTE:
To avoid a back-
powering effect, it is recommended to avoid having any HIGH logic level signal
applied to the digital pins of the module when it is powered OFF or during an ON/OFF transition.

Telit Wireless Solutions LE910C1-AP Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C1-AP
Category	Control Unit
Language	English