Need help?Do you have a question about the Telit Wireless Solutions ME910G1-WW and is the answer not in the manual?
General| Brand | Telit Wireless Solutions |
|---|---|
| Model | ME910G1-WW |
| Category | GSM/GPRS Modules |
| Language | English |
Details the pin assignments for USB, Serial Ports, SIM Card Interface, Digital Voice Interface, SPI, Digital IO, ADC, and RF Section.
Provides a top-view diagram of the LGA pads, showing their layout and pin assignments.
Details the required supply voltage, operating ranges, and minimum voltage for the ME910G1 module.
Provides typical power consumption values for idle modes, including CATM, NBIoT, 2G, and PSM.
Discusses electrical design considerations based on power source categories (+5V, +12V, Battery).
Provides guidelines for PCB layout related to power supply, focusing on capacitor placement and trace routing for EMI reduction.
Explains the procedure and requirements for powering on the ME910G1 module using the ON_OFF*/WAKE* pad.
Describes the two methods for powering off the device: AT command and ON_OFF*/WAKE* pin.
Details the HW_SHUTDOWN* signal for unconditional shutdown and its reset behavior.
Details the integrated USB 2.0 HS transceiver and lists available signals and notes.
Describes the 3-wire master SPI interface and lists available signals.
Introduces the two asynchronous serial ports (Main and Auxiliary) and common configurations.
Details the signals for Modem serial port 1, which is a +1.8V UART with 7 RS232 signals.
Explains the need for level translators to interface with PC COM ports or RS232 applications.
Shows the recommended footprint layout for the ME910G1 module on the application PCB.
Explains the difference between Solder Mask Defined (SMD) and Non-Solder Mask Defined (NSMD) pad definitions.
Summarizes the type approvals obtained for ME910G1 variants in different regions.
Details the RED Declaration of Conformity and links to relevant directives.
Directs users to FCC and ISED certificate information and applicable rules.
Covers modification statements, interference statements, and wireless notices for FCC/ISED.
Details FCC ID label requirements and lists models with their FCC IDs.
Explains ISED label requirements and lists modules with their ISED certification numbers.
Provides safety recommendations for using the product in various environments and handling precautions.
To Next Page
