Telit Wireless Solutions ME910G1-WW - 15 Document History

ME910G1 HW Design Guide
1VV0301593 Rev.7 Page 96 of 98 2021-02-02
15. DOCUMENT HISTORY
Revision
Date
Changes
7
2021-02-02 Reviewed template design and styles
Section 2.4, update
Chapter 4, update
Sections 6.1, 6.2, 6.3, removed (redundant)
Section 7.2, removed
Section 8.4, measurements update
Section 2.2, 2.5, 12.3, adding B86 update
6
2020-09-14 Section 2.5, TX Power update
Section 2.8, Temperature range update
Chapter 12, Conformity assessment update
5
2020-07-22 Conformity assessment update with ANATEL
4
2020-06-18 The title of chapter 5.7.3.2 has been changed from "Modem serial port
2" in "Modem serial port 2 (USIF1)".
The title of chapter 5.7.3.1 has been changed from "Modem serial port
1" in "Modem serial port 1 (USIF0)".
In the table of chapter 3.1, the "Asynchronous serial port" section title
has been changed in "Asynchronous serial port (USIF0)".
3
2020-06-10 Conformity assessment update
TX Output Power update
Power Consumption section update
GNSS Section update
Applicability table update
2
2020-01-23 Conformity assessment update
Power consumption figures update
RX Sensitivity figures update
RF Section update
Pull-up/down values update
1
2019-08-29 Bands support updating
Added ME910G1-WW
Temperature range update
Added power consumption figures
Removed B14
Extended Voltage Range lower limit change
0
2019-04-12 First issue