You can use up to five handsets with your Telstra
V1600. To do this you need to register each
additional handset with the base following the
simple steps given below.
Each handset can be registered on up to 4 bases.
Register a Telstra V1600 handset to a base.
1.
On the base, press and hold until you hear
two beeps.
You have 90 second to complete the following
steps.
2.
On the handset, press Menu, scroll to
Registration
, then press OK.
Registration Handset
is highlighted. Press
OK.
3.
The display shows the available base stations. A
against one of them indicates the handset is
already registered with that base.
4.
Scroll to the base you want to register to
then press OK.
5.
Enter the four-digit Security PIN (default setting
0000) then press OK. The handset registration is
confirmed and the handset is given a handset
number (1-5) which is displayed.
6.
Press and hold Back to return to standby.
IMPORTANT
Before registration, make sure
the handset batteries are fully
charged and that you are close
to the base
.
42 Additional handsets and bases
To Next Page
Loading...
