power and switched on.
• nected to the mains
• e? Move the handset
•
nected to the correct base, see page
43.
Product Information 1300 302
699
Call the V1600 Helpline:
•
If you are having difficulties
using your Telstra V1600
•
If you need a replacement
main power lead
Lines open:
(or ESST), 8:00am – 5:00pm EST
onday to Friday M
No display
• The batteries may be dead. Recharge or
replace the batteries, see ‘Replacing the
handset batteries’, page 49.
• Is the handset switched off? To switch the
handset on, see page 13.
No dial tone
• Check that the telephone line cord is plugged
into the phone socket.
• Check that the base is connect to the mains
You cannot link up with the base
Check that the base is con
power and switched on.
Are you out of rang
closer to the base.
Are the batteries low or flat? If so, charg• e the
batteries or replace them if necessary.
If using more than one base, check that you
are con
47 Help
To Next Page
Loading...
