Teltonika CAN-CONTROL - LVCAN Property Parameter Configurations

12
Parameter defines when event is sent: 0 – on range exit, 1 – on range entrance, 2 – both, 3 –
monitoring, 4 – hysteresis, 5 – on changes, 6 – on delta change.
3.4.4.6 1
st
LVCAN property parameter High level (ID=45102)
Parameter defines high value of triggered LVCAN property. This parameter is used to set
thresholds for LVCAN properties to generate events.
3.4.4.7 1
st
LVCAN property parameter Low level (ID=45103)
Minimum
Value
Maximum
Value
Default
Value
Goes with (depends on
parameters)
Value
Type
0 3 0 1st LVCAN property parameter
operand (ID=45101)
1st LVCAN property parameter
High level (ID=45102)
1st LVCAN property parameter
Low level (ID=45103)
1st LVCAN property parameter
Event only (ID=45104)
1st LVCAN property parameter
averaging constant (ID=45105)
1st LVCAN property parameters
Send SMS to (ID=7141)
1st LVCAN property parameters
SMS Text (ID=8141)
Uint8
Minimum
Value
Maximum
Value
Default
Value
Goes with (depends on
parameters)
Value
Type
0 255 0 1st LVCAN property parameter
priority (ID=45100)
1st LVCAN property parameter
operand (ID=45101)
1st LVCAN property parameter
Low level (ID=45103)
1st LVCAN property parameter
Event only (ID=45104)
1st LVCAN property parameter
averaging constant (ID=45105)
1st LVCAN property parameters
Send SMS to (ID=7141)
1st LVCAN property parameters
SMS Text (ID=8141)
Uint8