Teltonika CAN-CONTROL - SMS;GPRS Command List

9
3.4.2. SMS/GPRS Command List
Table 2 Command List
Command Description Response
lvcansetprog # Set program number to LV-CAN200/ ALL-CAN300/CAN-CONTROL
that is connected to FMB1YX.
# three digit number that identity vehicle.
Yes
lvcangetprog Get program number from LV-CAN200/ ALL-CAN300 that is
connected to FMB1YX.
Yes
lvcangetinfo Get information about connected LV-CAN200/ALL-CAN300. Yes
Lvcanclear # Clear Total Mileage (counted), Engine Work Time (counted), Fuel
Consumed (counted) parameters values.
# - parameter (0 – Engine work time (counted), 1 – Fuel Consumed
(counted), 2 – Vehicle Mileage (counted)).
lvcanopenalldoors Open [unlock] all doors Yes
lvcanclosealldoors Close [lock] all doors Yes
lvcanopentrunk Open [unlock] trunk Yes
lvcanturninglights One flash of all turn lights ordered trough accidental / blinking turn
light switch
Yes
lvcanwindowsopen:# open windows xx sec. (one sending of command will cause the
windows to continue opening for xx seconds). xx: [1,3,5...25,27,29]
Yes
lvcanwindowsclose:# close windows xx sec. (one sending of command will cause the
windows to continue closing for xx seconds). xx: [1,3,5...25,27,29]
Yes