Teltonika FMT100 - Security Mode (ID=803); Connection Mode (ID=807); External MAC (ID=804); External Name (ID=805)

76
6.12.1.4 Security Mode (ID=803)
Parameter defines a security mode of FMT100X device. 0 – PIN only, 1 – PIN + MAC list,
2 – MAC list only, 3 – None.
Minimum
value
Maximum
value
Default value
Goes with (depends on)
parameters
Value
type
0
3
0
U64
6.12.1.5 Connection Mode (ID=807)
Settings for automatic connection: 0 – None, 1 – Data Link.
Minimum
value
Maximum
value
Default value
Goes with (depends on)
parameters
Value
type
0
3
0
U64
6.12.1.6 External MAC (ID=804)
Defines external device’s MAC, for FMT100 to auto connect to.
Minimum
value
Maximum
value
Default value
Goes with (depends on)
parameters
Valu
e type
0 symbols
12
symbols
0
string
6.12.1.7 External Name (ID=805)
Defines external device’s name, for FMT100 to auto connect to.
Minimum
value
Maximum
value
Default value
Goes with (depends on)
parameters
Value
type
0 symbols
30
symbols
0
string
6.12.1.8 External PIN (ID=806)
Defines external device’s PIN, for FMT100 to auto connect to.
Minimum
value
Maximum
value
Default value
Goes with (depends on)
parameters
Value
type
0 symbols
8 symbols
0
string
6.12.1.9 Authorized Devices MAC List (ID=830-834)
Parameter allows to add an authorized devices MAC for connection to FMT100.
Minimum
value
Maximum
value
Default value
Goes with (depends on)
parameters
Value
type
0 symbols
12 symbols
String
6.13 I/O parameters
I/O properties are additional data sources which are recorded along with usual GPS data.