To Next PageTo Next Page
Need help?Do you have a question about the Teltonika RUT300 and is the answer not in the manual?
Review recommendations and precautions to minimize accident possibility before operating the device.
Details input voltage range, max power consumption, and power adapter specifications.
Device complies with Part 15 of FCC Rules; subject to two conditions regarding interference.
Equipment tested for Class B limits to provide protection against harmful interference in residential installations.
Device contains license-exempt transmitters complying with Innovation, Science, and Economic Development Canada's RSS(s).
Specifies operating temperature range (-40° to +75° Celsius) and humidity (10%-90% non-condensing).
Device should be kept out of direct sunlight and away from heat sources, corrosive substances, and flammable gases.
Do not attempt to disassemble faulty devices or accessories; refer to service center if submerged or dropped.
Use only approved accessories. Ground devices with grounding terminals before connecting to power.
Do not connect incompatible products. Ensure protective grounding conductor area is at least 1mm2.
Users are responsible for device use. Keep device clean and dust-free, away from liquids and moisture.
Avoid dropping, bending, or cleaning with harsh chemicals. Do not paint the device or accessories.
Equipment should be opened only by qualified personnel. Use ESD protection when servicing.
Do not use in poor heat dissipation environments. Power off during thunderstorms or near explosive atmospheres.
Keep device away from children. Arrange cables to prevent tripping hazards.
Visual guide to the front components of the RUT300 device.
Visual guide to the back components of the RUT300 device.
Details on the various connectors available on the RUT300 device.
Access a video guide for setting up the Teltonika Networks RUT300 router.
Instructions for the physical installation of the RUT300 hardware.
Steps to configure your computer's Local Area Network (LAN) connection for Windows.
Instructions on how to log in to the router's web interface.
Ensure network connection is enabled and check IP/DNS settings for automatic acquisition.
Type http://192.168.1.1 into your browser to access the router's WebUI.
Set a new password after login. The Configuration Wizard helps set main operational parameters.
Review recommendations and precautions to minimize accident possibility before operating the device.
Details input voltage range, max power consumption, and power adapter specifications.
Device complies with Part 15 of FCC Rules; subject to two conditions regarding interference.
Equipment tested for Class B limits to provide protection against harmful interference in residential installations.
Device contains license-exempt transmitters complying with Innovation, Science, and Economic Development Canada's RSS(s).
Specifies operating temperature range (-40° to +75° Celsius) and humidity (10%-90% non-condensing).
Device should be kept out of direct sunlight and away from heat sources, corrosive substances, and flammable gases.
Do not attempt to disassemble faulty devices or accessories; refer to service center if submerged or dropped.
Use only approved accessories. Ground devices with grounding terminals before connecting to power.
Do not connect incompatible products. Ensure protective grounding conductor area is at least 1mm2.
Users are responsible for device use. Keep device clean and dust-free, away from liquids and moisture.
Avoid dropping, bending, or cleaning with harsh chemicals. Do not paint the device or accessories.
Equipment should be opened only by qualified personnel. Use ESD protection when servicing.
Do not use in poor heat dissipation environments. Power off during thunderstorms or near explosive atmospheres.
Keep device away from children. Arrange cables to prevent tripping hazards.
Visual guide to the front components of the RUT300 device.
Visual guide to the back components of the RUT300 device.
Details on the various connectors available on the RUT300 device.
Access a video guide for setting up the Teltonika Networks RUT300 router.
Instructions for the physical installation of the RUT300 hardware.
Steps to configure your computer's Local Area Network (LAN) connection for Windows.
Instructions on how to log in to the router's web interface.
Ensure network connection is enabled and check IP/DNS settings for automatic acquisition.
Type http://192.168.1.1 into your browser to access the router's WebUI.
Set a new password after login. The Configuration Wizard helps set main operational parameters.
General| USB version | 2.0 |
|---|---|
| USB ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 5 |
| Product color | Blue, Metallic |
| Housing material | Aluminum |
| VLAN support | Yes |
| Networking standards | IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3u |
| Ethernet interface type | Fast Ethernet |
| DSL WAN | - |
| SIM card slot | No |
| Supported network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP (planned), MQTT (planned), Wake on LAN (WOL) (planned) |
| Security algorithms | HTTPS |
| Flash memory | 16 MB |
| Internal memory | 64 MB |
| Processor model | Qualcomm Atheros QCA9531 |
| Processor frequency | 650 MHz |
| Internal memory type | DDR2 |
| Power source type | DC, PoE |
| Operating temperature (T-T) | -40 - 75 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 85 mm |
|---|---|
| Width | 100 mm |
| Height | 30 mm |
| Weight | 229 g |
