,,%.\
TEMPTRONIC
-
TP04 100A Operator's Manual
CORPORATION
Rev
B:
04/15/98
i
1
j
\
I
4.4.
Shutdown
by
Power
OFF
/
i
i
To shutdown the TP04 100A System after it has been turned on and operated:
3
1. Press the "ESC" Program Button on any program screen to return to the
Top
Menu Screen.
This may require one, two or three
ESC button presses.
2.
Once at the
Top
Menu Screen, actuate the Main Power Switch downward to the
0
(OFF
[down]) position to
turn
off the TP04100A. -Note that
the
power (ordoff) indicator Iamp
should
turn
off (see Figure 2-1 Main Power Switch on page
9).
NOTE:
When moving
the
TP04100A to a different test location, or when shutting it down for
an extended period,
hun
off and disconnect it from both its
-
(ac) power source and compressed
air supply.
Page:
18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com