Filter Mode: Click one radio button to enable or
disable to access the Internet.
Policy Name: Enter a name for the access policy
selected.
IP Start/End: Enter the starting/ending IP
address.
Port No.: Enter the port range based over the
protocol for access policy.
Protocol: Select one protocol (TCP/UDP/Both)
from the drop-down menu.
Times: Select the time range of client filter.
Days: Select the day(s) to run the access policy.
For example:
If you don’t want the computer at the IP address of
192.168.0.100 to access the Internet from 9 ： 00 to
18 ： 00 everyday without restrictions to other
computers in LAN, you need to set the packet filtering
list as the above diagram.
13.2 URL Filter Settings
In order to control the computer to have access to
websites, you can use URL filtering to allow the
computer to have access to certain websites at fixed
time and forbids it having access to certain websites
at fixed time.
To Next Page
Loading...
