MAC Address Filter ： Enable/disable MAC
address filter. Select “off” to malfunction MAC
address; “disable” to prevent the MAC addresses
in the list from accessing the wireless network;
“Allow” to allow the MAC address in the list to
access the wireless network.
MAC Address Management ： Input the MAC
address to implement the filter policy. Click “Add”
to finish the MAC add operation.
MAC Address list ： Show the added MAC
addresses. You can add or delete them.
7.7 Connection Status
This page shows wireless client’s connection status,
including MAC address, Channel bandwidth, etc. Select
“Wireless Setting->connection status” to enter the
following screen:
To Next Page
Loading...
