Chapter 5 Quick Setup Guide
This chapter deals with how to access the Internet
quickly.
After you enter the Router’s Web-based interface from
the Internet Explorer, please select the access medium
type provided by your ISP in “WAN Medium”. After
saving and rebooting the device, please select your
connection type (PPPOE, Dynamic IP, and Static IP
etc.) provided by your ISP to finish the basic settings.
Please follow this guide to connect your Router to the
Internet.
5.1 Setup Wizard
5.1.1 3G Broadband Connection (via 3G WAN)
If you have a 3G USB modem card and you want to
share 3G signals and access the Internet, please
select “3G WAN” in “WAN Medium” after you enter the
Router’s Web-based interface.
Please follow the diagram below:
To Next Page
Loading...
