Note：
1. If you want to login the device’s Web-
based interface via port 8080, you need use
the format of WAN IP address: port (for
example http://219.134.32.101: 8080) to
implement remote login.
2. If your WAN IP address starts and ends
with 0.0.0.0, it means all hosts in WAN can
implement remote Web management. If you
change the WAN IP address as
218.88.93.33-218.88.93.35, then only the IP
addresses as 218.88.93.33, 218.88.93.34
and 218.88.93.35 can access the Router.
For example:
If you want to configure the IP address 218.88.93.33
to access the device’s web interface, please set it as
above.
13.6 Local Web Management
Local web management, the alternative to remote web
management, is to allow the network administrator to
manage the Router in LAN. Any PC in the LAN can
access the Web management utility by default. So you
can enter the specific MAC address of the LAN
computer to function.
To Next Page
Loading...
