Tenda 3G611R+ - 15.4 Restore to Factory Default Setting

15.4 Restore to Factory Default Setting
This button is to reset all settings to the default
values. It means the Router will lose all the settings
you have set. So please Note down the related
settings if necessary.
 Restore: Click this button to restore to default
settings.
 Factory Default Settings:
User Name: admin
Password: admin
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
NOTE: After restoring to default settings, please
restart the device, then the default settings can
go into effect.