Tenda AP Series User Manual

Caution
Adapter Model: BN017-A38048E, BN017-A38048B
Manufacture: SHENZHEN HEWEISHUN NETWORK
TECHNOLOGY CO., LTD.
Input: 100-240V AC, 50/60Hz 1.0A
Output: 48V DC, 0.8A
: DC Voltage
RECYCLING
This product bears the selective sorting symbol for Waste
electrical and electronic equipment (WEEE). This means that this
product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its
impact on the environment.
User has the choice to give his product to a competent recycling
organization or to the retailer when he buys a new electrical or
electronic equipment.
- 22 -
Caution:
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate this equipment.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Operating frequency: 2412-2462MHz, 5150-5250MHz
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. (2) To avoid unnecessary radiation interference, it is
recommended to use a shielded RJ45 cable.
Operating Temperature: -10°C - 40°C
Operating Humidity: (10% - 90%) RH, non-condensing

Tenda AP Series Specifications

General

Model	AP Series
Category	Wireless Access Point
Frequency Range	2.4GHz/5GHz
Wireless Standards	IEEE 802.11a/b/g/n/ac
Wireless Speed	Up to 1200Mbps
Operating Mode	Repeater
Security	WPA/WPA2-PSK
Antenna	External antennas
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing