Need help?Do you have a question about the Tenda AX3000 and is the answer not in the manual?
General| Wi-Fi Standard | Wi-Fi 6 (802.11ax) |
|---|---|
| MU-MIMO | Yes |
| Beamforming | Yes |
| OFDMA | Yes |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Ports | 1 x 10/100/1000 Mbps WAN port, 3 x 10/100/1000 Mbps LAN ports |
| Antenna | 4 x external antennas |
| Security | WPA3, WPA2, WPA, WEP |
| Button | WPS/Reset |
Step-by-step guide to access the AP's web interface for configuration.
Step-by-step instructions for configuring basic network settings for internet access.
Displays current information about the AP, including uptime, firmware version, and network status.
Provides information on RF status, network mode, and connected SSIDs.
Configures LAN settings, including IP address, subnet mask, and device name.
Manages wireless network settings, including SSID, security mode, and encryption.
Manages access to wireless networks based on MAC addresses, allowing or forbidding specific devices.
Covers rebooting, resetting, firmware upgrades, and backup/restore functions.
To Next Page
