65
7.2.3 Upgrade firmware
This function enables you to upgrade the AP’s firmware to get more functions and higher stability.
To ensure a correct upgrade and avoid damage:
Make sure the new firmware is applicable to the AP.
Keep a proper power supply to the AP during the upgrade.
Configuration procedure:
Step 1 Download the latest firmware version for the AP from www.tendacn.com to your local
computer and decompress the package. Generally, the package is in the format of .bin.
Step 2 Log in to the web UI of the AP and choose Tools > Maintenance > Maintenance.
Step 3 Click Upgrade.
Step 4 Choose and upload the upgrade file in the popped window.
---- End
Wait until the progress bar completes. Then log in to the web UI of the AP again. Click Status >
System Status and check whether the upgrade is successful according to the Firmware Version
parameter.
After the firmware is upgraded, you are recommended to restore the factory settings of the AP and
configure the AP again, so as to ensure stability of the AP and proper operation of new functions.
To Next Page
Loading...
Need help?
General
