7
3.2 Quick setup
Before configuration, ensure that the upstream router has connected to the internet.
Step 1 Choose Quick Setup.
Step 2 Choose the Radio Band you wish to configure, for example, 2.4 GHz.
Step 3 Set a wireless network name (primary SSID) in the SSID box.
Step 4 Select a Security Mode and configure the incurred parameters.
Step 5 Click Save.
Step 6 If you need to set other wireless networks in another radio band, please select another
wireless radio band and perform step 2 to 5 again.
---- End
Search and connect your wireless devices such as smart phones to the SSID you set. Enter the
wireless password (the Key you set) and you will be able to access the internet.
Parameter description
Parameter Description
Radio Band It is used to select the radio band for configurations.
SSID Click to modify the WiFi name of the primary network under the selected radio band.
Security Mode
Select the security modes for target wireless networks, including None, WEP, WPA-PSK,
WPA2-PSK, WPA3-SAE, WPA3-SAE/WPA2-PSK, WPA-PSK & WPA2-PSK, WPA and
WPA2.
To Next Page
Loading...
Need help?
General
