77
Appendix
A.1 Default parameter values
The following table lists the default parameter values of the AP.
Parameter Default Value
Login
Login IP address 192.168.0.254
User Name
|Password
Administrator admin|admin
Quick Setup Working Mode AP
LAN Setup IP Address Type
The default IP address of the LAN port is
192.168.0.254.
If the LAN where the AP is located has a DHCP server,
the AP may automatically obtain a new IP address
from the DHCP server. In this case, go to the client list
of the DHCP server to check the IP address obtained
by the AP.
SSID SSID
2.4 GHz
The AP allows 7 SSIDs.
SSID is Tenda_XXXXXX. XXXXXX indicates the last 6
digits of the AP’s LAN MAC address with a range of
XXXXXX~XXXXXX+6.
By default, the primary SSID is enabled, and the other
SSIDs are disabled.
5 GHz
The AP allows 4 SSIDs.
SSID is Tenda_XXXXXX_5G. XXXXXX indicates the last
6 digits of the AP’s LAN MAC address with a range of
XXXXXX+6~XXXXXX+9.
By default, the primary SSID is enabled, and the other
SSIDs are disabled.
RF Settings Wireless Network Enable
To Next Page
Loading...
Need help?
General
