Need help?Do you have a question about the Tenda 11AC and is the answer not in the manual?
General| Frequency Bands | 2.4GHz, 5GHz |
|---|---|
| Ports | 1 x 10/100/1000Mbps WAN port, 3 x 10/100/1000Mbps LAN ports |
| Wireless Standards | IEEE 802.11ac/a/n 5GHz, IEEE 802.11b/g/n 2.4GHz |
| Antennas | 4 x external antennas |
| Security | WPA/WPA2-PSK, WPA/WPA2 |
| Power Supply | DC 12V/1A |
| Operating Mode | Router, WISP |
| Maximum Data Rate | 1167Mbps (300Mbps at 2.4GHz and 867Mbps at 5GHz) |
General introduction to the AP's capabilities, operation, and transmission rate.
Describes the physical components and layout of the AP.
Details the function and location of buttons, LEDs, and connectivity ports on the AP.
Describes deploying the AP in large residential spaces like apartments and villas.
Step-by-step guide for AP deployment using Tenda's AP controller functionality.
Details AP deployment scenarios and management for hotels.
Step-by-step instructions for accessing the AP's web interface using a browser.
Explanation of the different sections within the AP's web user interface.
Describes the function of common buttons like Save, Restore, and Help in the web UI.
Introduces the Quick Setup module for rapid AP configuration of wireless networks.
Detailed configuration steps for AP and Client+AP modes.
Configuration steps for setting the AP to operate in AP mode.
Configuration steps for setting the AP to operate in Client+AP mode.
Displays AP system status, uptime, firmware version, and LAN port information.
Configures network parameters for the AP's LAN port, including IP address.
Configures SSID parameters, security modes, and network names for wireless networks.
Manages wireless access control based on MAC addresses of connected devices.
Steps to configure the AP's SNMP agent for network monitoring and management.
Procedure to upgrade the AP's firmware for new features and enhanced stability.
Enables backup, restore, and factory reset of AP configurations for data safety.
Manages manual and scheduled rebooting of the AP to maintain performance.
Frequently asked questions and their solutions for common AP issues.
Lists the default configuration values for various AP parameters.
To Next Page
