Tenda 11AC - Login and Web UI Navigation; 3.1 Logging into the Web UI

10
3 Login
3.1 Logging in to the Web UI of the AP
You can log in to the web UI of the AP using a web browser. The procedure is as follows:
Step 1 Use an Ethernet cable to connect the management computer to the AP or the switch connected to
the AP.
Step 2 Set IP address of your local area connection to 192.168.0.X (X: 2 - 253) and Subnet mask to
255.255.255.0.
Step 3 Start a web browser on the computer, enter the management IP address of the AP (default:
192.168.0.254) in the address bar, and press Enter.
Step 4 Enter the user name and password of the AP (default user name and password: admin/admin) and
click Login.