21
5 Status
This module allows you to view system status, wireless status, traffic statistics and wireless clients.
5.1 System Status
To access the page, choose Status > System Status.
The page displays the system and LAN port status of the AP.
Parameter description
It specifies the name of the AP.
A unique AP name helps quickly identify the AP. You can change the AP name on the Network
Settings > LAN Setup page.
It specifies the time that has elapsed since the AP was started last time.
It specifies the current system time of the AP.
Number of Wireless
Clients
It specifies the number of wireless clients currently connected to the AP.
It specifies the firmware version number of the AP.
It specifies the hardware version number of the AP.
To Next Page
Loading...
Need help?
General
