100
9.7 Reboot Device
This module enables you to manually reboot the AP or configure the AP to automatically reboot.
When the AP reboots, all connections are released. You are recommended to reboot the AP at an idle
hour.
9.7.1 Manual Reboot
If a setting does not take effect or the AP works improperly, you can try rebooting the AP manually to resolve
the problem.
Procedure:
Step 1 To access the page, choose Tools > Reboot Device > Manual Reboot.
Step 2 Click Reboot.
Step 3 Click OK.
---End
Wait until the progress bar is done.
To Next Page
Loading...
