84
9 Tools
9.1 Firmware Upgrade
This function upgrades the firmware of the AP for more functions and higher stability.
To prevent damaging the AP, verify that the new firmware version is applicable to the AP before
upgrading the firmware and keep the power supply of the AP connected during an upgrade.
Configuration procedure:
Step 1 Download the package of a later firmware version for the AP from http://www.Tenda.com.cn to your
local computer, and decompress the package.
Step 2 Log in to the web UI of the AP and choose Tools > Firmware Upgrade.
Step 3 Click Choose File and select the file for upgrading the firmware.
Step 4 Click Upgrade.
Step 5 Click OK.
---End
Wait until the progress bar is complete. Log in to the web UI of the AP again. Choose Status > System Status
and check whether the upgrade is successful based on Firmware Version.
To Next Page
Loading...
Need help?
General
