Tenda 11AC User Manual

83
---End
Configuring the NMS
On an NMS that uses SNMP V1 or SNMP V2C, set the read community to Tom and read/write community to
Tom 123. For details about how to configure the NMS, refer to the configuration guide for the NMS.
Verification
After the configuration, the NMS can connect to the SNMP agent of the AP and query and set some
parameters on the SNMP agent through the MIB.

Tenda 11AC Specifications

General

Brand	Tenda
Model	11AC
Category	Wireless Access Point
Language	English