73
7.6 Advanced Settings
7.6.1 Overview
This module is used to set the Identify Client Type and Broadcast Packet Filter of the AP.
Identify Client Type
It specifies whether to identify operating system types of wireless clients connected to this device. Terminal
types that the AP can identify include: Android, iOS, WPhone, Windows, Mac OS, and so on.
Broadcast Packet Filter
By default, this device forwards lots of invalid broadcast packets from wired networks, which may affect
business data transfer. The broadcast packet filter function allows you to filter broadcast packets by types so
that invalid packets are not forwarded. This reduces air interface resources usage and ensures more bandwidth
for business data transfer.
7.6.2 Changing the Advanced Settings
It is recommended that you change the settings only under the instruction of professional personnel,
so as to prevent decreasing the wireless performance of the AP.
Step 1 Choose Wireless Setting > Advanced Settings.
Step 2 Change the parameter settings as required.
Step 3 Click Save.
---End
Parameter description
Enable: It specifies whether to enable the function. The operating system type of wireless devices
connected to the AP’s WiFi network can be viewed by choosing Status > Wireless Clients.
Disable: It specifies whether to disable the function.
Enable: It specifies whether to enable the function. With the function enabled, the AP can reduce
air interface resources usage and ensure the bandwidth for business data transfer.
To Next Page
Loading...
Need help?
General
