Tenda W300A User Manual

300M Wireless-N Access Point

Tenda W300A Specifications

General

Wireless Standards	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Maximum Wireless Speed	300 Mbps
Ethernet Ports	1 x 10/100Mbps
Wireless Security	WPA/WPA2
Operating Mode	Repeater
Power Supply	5V DC / 1A
Antenna Type	2 x 5dBi external antennas

Summary

Chapter 1 Product Overview

1.1 Features

1.3 LED Indicator and Panel Description

Chapter 2 Hardware Installation

Chapter 3 Web Configuration

3.1 Web Login

Instructions on how to access the W300A's web-based management interface.

3.2 Wizard

Explains how to use the setup wizard for initial configuration of the W300A.

3.4 LAN Settings

Configures the basic network settings for the W300A's LAN interface.

Chapter 4 Wireless Settings

4.1 Working Mode

Explains how to select one of the five available working modes for the W300A.

4.1.1 Access Point (AP) Mode

Details the functionality and application of the AP mode for the W300A.

4.1.2 P2P (Point to Point) Bridge Mode

Explains how to configure the W300A in P2P Bridge mode for connecting wired networks wirelessly.

4.1.3 P2MP Bridge Mode

4.1.4 Wireless Repeater Mode

4.1.5 Wireless Client Mode

4.2 Advanced Settings

4.3 WPS Settings

4.4 Access Control

Chapter 6 System Tools

6.1 Password Change

Instructions for changing the device's user name and password for enhanced security.

6.2 Restore to Factory

Explains how to reset all device configurations to their original factory default settings.

6.6 Firmware Upgrade

Provides steps for upgrading the device's firmware to the latest version.

Appendix II: TCP/IP Address Setting

Accessing TCP/IP Properties

Setting Static IP Address

How to manually configure IP address, subnet mask, and gateway settings.