300M Wireless-N Access Point
5.2 SNMP Setting
This device supports SNMP v1 and SNMP v2c. Please
click “SNMP Setting” in the left page to enter the
following window:
Click “enable” or “disable” to enable and disable SNMP
management.
Setting Expl
anation：
Contact
：
Set the name to access the AP. Usually
set the administrator’s name.
Device Name
：
Set the AP’s name, such as
Tenda_300A.
Location
：
Set the AP’s network location.
Read Community: Indicates the community
read access string to permit reading this AP’s
63
To Next Page
Loading...
