300M Wireless-N Access Point
4.1.2 P2P (Point to Point) Bridge Mode
Two wired local networks communicate and share
network resource via two W300A’s wireless signals
which also can extend the wired network. In this mode,
AP can not connect with wireless clients, but serve as
wireless bridge.
4.1.2.1 A
pplication Plan
P2P
bridge mode can connect with two wired network
via wireless access points, which communicate by
wireless signals and not by cables. This mode can free
from the cable trouble. The P2P topology shows below:
4.1.2.2 P2P
Bridge Setting
In the working mode, select “WDS P2P” to enter the
next screen.
33
To Next Page
Loading...
