300M Wireless-N Access Point
Setting Explanation
Select SSID
：
Select the SSID (main
SSID or minor SSID) to configure
security setting from the drop-down
menu.
802.1x WEP
：
Click “Enable/Disable” to
enable or disable the WEP algorithm.
Radius Server
：
Enter the IP address of
the Radius server.
Radius Server Port
：
Enter the
authentication port of the Radius server.
The default is 1812.
Shared Secret
：
Enter the shared key
for authentication server with 8~63
ASCII characters.
Session Timeout
：
The authentication
interval period between AP and
authentication server. The default is
3600s.
Note: To improve security level, do not use
too easy characters.
32
To Next Page
Loading...
