300M Wireless-N Access Point
4.1.1 Access Point (AP) Mode
The AP mode is the basic mode of the device. When the
system is reset to the default factory settings, the
operating mode reverts to AP mode. In this mode, the
AP will act as a central hub for different wireless LAN
clients. For example, when traveling to a hotel that has
high-speed internet access, you can connect to the
internet through the AP which is connected to an
Ethernet cable in the room.
4.1.1.1 Application and Topology Plan
The AP mode can convert the wired transmission into
wireless signals. If you have one wired cable
connecting to Internet, and want to access the
Internet via wireless signals connecting to your
notebook computer, this mode fits perfectly.
17
To Next Page
Loading...
Need help?
General
