300M Wireless-N Access Point
Chapter 3 Web Configuration
3.1 Web Login
Connect to W300A via wired cable and configure
192.168.0.x(x ranges 1-253) as your PC’s IP address,
and 255.255.255.0 as subnet mask. (Please refer to
the Appendix II for details on TCP/IP setting)
Launch Internet Explorer or Netscape Navigator. In the
address bar, enter the AP’s default IP address,
192.168.0.254. Press Enter key and the login screen
will appear.
Enter admin both in the user name and password field.
When this is your first time to open the Web-based
management interface, you can set a new password
from the System Tool – Change password tab.
10
To Next Page
Loading...
Need help?
General
