Tenda 11AC User Manual

22
Parameter
Description
MAC Address
It specifies the physical address of the LAN port of the AP. If you connect the AP to other devices
using Ethernet cables, the AP uses this MAC address to communicate with those devices.
IP Address
It specifies the IP address of the AP.
The web UI of the AP is accessible at this IP address. You can change the IP address on the Network
Settings > LAN Setup page.
Subnet Mask
It specifies the subnet mask of the IP address of the AP.
Primary DNS Server
It specifies the primary DNS server of the AP.
Secondary DNS Server
It specifies the secondary DNS server of the AP.

Tenda 11AC Specifications

General

Brand	Tenda
Model	11AC
Category	Wireless Access Point
Language	English