Tenda AX3000 - Monitoring AP Status; System Status Details

8
4 Status
4.1 System status
The System Status page allows you to check the System Status and LAN Port Status of the AP.
To access the page, choose Status > System Status.
Parameter description
Parameter Description
System Status
Device Name
It specifies the name of the AP.
You can modify it on LAN Setup page.
Uptime It specifies the time that has elapsed since the AP starts up last time.
System Time It specifies the current system time of the AP.
Firmware Version It specifies the current firmware version number of the AP.
Hardware Version It specifies the current hardware version number of the AP.
Number of
Wireless Clients
It specifies the quantity of wireless devices currently connected to the
AP.