Tenda AX3000 User Manual

6
3 Quick setup
3.1 Overview
In the Quick Setup module, you can set up the AP in a quick way to enable internet access for your
wireless devices such as smart phones and tablets.
AP supports only the AP mode. In this mode, AP connects to the internet using Ethernet cables and
transforms wired signals to wireless signals for wireless coverage. See the following topology.
Internet
Router
PoE Switch
AP mode
LAN port
WAN port
AP

Tenda AX3000 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
MU-MIMO	Yes
Beamforming	Yes
OFDMA	Yes
Frequency Bands	2.4 GHz, 5 GHz
Ports	1 x 10/100/1000 Mbps WAN port, 3 x 10/100/1000 Mbps LAN ports
Antenna	4 x external antennas
Security	WPA3, WPA2, WPA, WEP
Button	WPS/Reset