64
7.2.2 Reset
If you cannot locate a fault of the AP or forget the password of the web UI of the AP, you can reset
the AP to restore its factory settings and then configure it again.
When the factory settings are restored, your configuration is lost. Therefore, you need to
reconfigure the AP to reconnect to the internet. Restore the factory settings of the AP only when
necessary.
To prevent AP damages, ensure that the power supply of the AP is normal when the AP is reset.
After the factory settings are restored, the login IP address of the AP is changed to 192.168.0.254,
and the user name and password of the AP are changed to admin.
Method 1:
After AP completes startup, hold down the reset button (RESET or Reset) for about 8 seconds.
Method 2:
Log in to the web UI of the AP, on the Tools > Maintenance > Maintenance page, click Reset.
To Next Page
Loading...
Need help?
General
