Tenda AX3000 User Manual

66
7.2.4 Backup/restore
The backup function allows you to back up the current configuration of the AP to a local computer.
The restore function allows you to restore the AP to a previous configuration.
If the AP enters the optimum condition after you greatly change the configuration of the AP, you are
recommended to back up the new configuration, so that you can restore it after upgrading or
resetting the AP.
If you need to apply same or similar configurations to many APs, you can configure one of the APs, back
up the configuration of the AP, and use the backup to restore the configuration on the other APs. This
improves configuration efficiency.
Backup the current configuration
Step 1 Choose Tools > Maintenance > Maintenance.
Step 2 Click Backup/Restore.

Tenda AX3000 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
MU-MIMO	Yes
Beamforming	Yes
OFDMA	Yes
Frequency Bands	2.4 GHz, 5 GHz
Ports	1 x 10/100/1000 Mbps WAN port, 3 x 10/100/1000 Mbps LAN ports
Antenna	4 x external antennas
Security	WPA3, WPA2, WPA, WEP
Button	WPS/Reset