1
1 Log in to the Web UI
1.1 Login
Step 1 Connect your computer to the AP or the switch connected to the AP with an Ethernet
cable.
Step 2 Ensure that the IP address of the management computer is in the same network segment
of the AP.
For example, if the IP address of the AP is 192.168.0.254, the management computer
should be configured with an IP address of 192.168.0.X (X: 2~253).
Step 3 Start a web browser on the computer, enter the IP address of the AP (default:
192.168.0.254) in the address bar.
To Next Page
Loading...
