Tenda AX3000 User Manual

60
7 Tools
7.1 Date & time
This section allows you to set the system time and login timeout interval of your AP.
7.1.1 System time
The System Time page allows you to set the system time.
To access the page, choose Tools > Date & Time > System Time.
Ensure that the system time of the AP is correct, so that time-based functions can take effect
properly. The AP supports Sync with Internet Time and Manual to correct the system time.
Sync with Internet Time
The AP automatically synchronizes its system time with a time server of the internet. This enables
the AP to automatically correct its system time after being connected to the internet. The AP can
also self-calibrate after restarting without setting again.
For details about how to connect the AP to the internet, refer to LAN Setup.

Tenda AX3000 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
MU-MIMO	Yes
Beamforming	Yes
OFDMA	Yes
Frequency Bands	2.4 GHz, 5 GHz
Ports	1 x 10/100/1000 Mbps WAN port, 3 x 10/100/1000 Mbps LAN ports
Antenna	4 x external antennas
Security	WPA3, WPA2, WPA, WEP
Button	WPS/Reset