Super easy IP Camera
17
3.4.2.1 Modify camera
a)Security Code: can change the camera password
b) Video setting: can adjust common video parameters: Video quality, video flip, video mirror,
Environment mode
c) WiFi: Click “WiFi” to enter searched wireless list, and then you can select usable wireless
network.
d) Motion Detection: If this funtion OFF, camera can’t send motion detection alarm. If choose
Low\Medium\High\Max means motion detection function ON. When sensitivity higher, then the
camera trigger alarm more easily; default area is full screen.
e) Recording Mode: With 3 options Off/Full Time/Alarm. If choose “Off”, camera stop recording;
“Full time”, camera will record all the time; recommended “Alarm”, camera record after trigger
motion detection alarm (need motion detection function ON and device with MicroSD/TF card)
f) Format SDCard: click this button, then format the memory card (need camera with card,
otherwise, without this option
g) About Device: dispaly camera model, version, vender, total size and free size of memory card.
3.4.2.2 Event:
It can view the full time recording or alarm recording of camera
4. PC View and Install
Visit Tenda official website www.tendacn.com, search your model on the top right corner, click
and enter the product you found. Click the " Downloads" and get the "PC P2P remote Software" ,
install "CloudNeteyeForPC" after decompressed.
4.1 Software function specification
To Next Page
Loading...
General