Super easy IP Camera
35
Camera support RTSP, if enable RTSP for verifying, you need to input the user name and
password when use RTSP to call the video.
Note: When you modify the parameters, you need to click “Save” to save your settings
5.2.4.2 Remote Access Setting (DDNS）
User can use third party DDNS, such as www.dynddns.org, just need to log in to the website
to apply for a free domain name, fill in the Settings box, and save the settings. Do the port
mapping, then you can remote access your IP camera. (Note: IP camera default to obtain the IP
address automatically, if you need to remote access via DDNS, the IP address should be manually
to be fixed IP address, or it can’t port mapping.
Note: When use third party domain name, if the port number is not 80, you need to add a
colon behind the domain name and plus the port number, such as: http://chen.dynddns.org:8081.
Note: 1. Problem of setting remote access, please refer to Addendum1
2.Please click “Apply” after modified parameter.
To Next Page
Loading...
General