Super easy IP Camera
48
any special characters, Chinese characters or symbols!
C. Manually specify your wireless Router’s security settings, say, WPA2-PSK, AES. Do NOT use
the Auto option.
D. After you configured your Router as required above, connect your PC to the camera via an
Ethernet cable.
E. Open camera’s web page, search and select the Router’s SSID.
F. Enter the Router’s security key.
G. First disconnect the Ethernet cable and power supply from the camera and then reconnect the
camera to a power source.
H. Restart the camera and the problem will be resolved.
12. Why it is too slow when watched from my phone?
Please watch it via a 3G or WIFI connection. 2G connection may not be good enough for the
service. But sometimes the 3G network is not nice either. Try lowering the resolution on your
mobile phone if you use a H.264 format camera.
13. Is the camera’s wireless connection secured? Can others connect to my camera?
The camera’s wireless connection is well secured with WEP/WPA/WPA2 wireless encryptions.
14. What wireless protocols does the camera support?
It supports 802.11b/g/n and wireless transmission rate up to 150Mbps.
To Next Page
Loading...
General