Wireless Modem Router
25
To configure a static IPv6 address
Select Use the following Static IPv6 address.
Configure WAN IPv6 Address/Prefix Length and WAN Next-Hop IPv6 Address.
Click Next -> Next to enter the screen below.
Select Use the following Static IPv6 DNS address and manually enter the DNS server address. If you have two DNS
server addresses, enter the second also.
Click Next -> Apply/Save.
_________________________________________________________________________________________________
Note:
If "Obtain an IP address automatically" is chosen, DHCP will be enabled for PVC in IPoE mode.
_________________________________________________________________________________________________
To Next Page
Loading...
