124
Then click Apply/Save to save the settings.
b. If you select Enable(Scan) in Bridge Action field:
Select the SSID of Router 2 (Tenda_112252) in Remote Bridges MAC Address field.
If you cannot find the SSID on the list, click Refresh to refresh the list.
Then click Apply/Save to save your settings.
The configuration is finished. Then the devices can connect Router 2 wirelessly or via Ethernet cables.
If AP Mode of Router 2 is Wireless Bridge, you can only select Enable and enter the MAC address (02:10:18:01:00:02)
to bridge Router 2.
To Next Page
Loading...
