Tenda D305 - Page 140

135
② Click the "Browse" button to locate the firmware file.
③ Click to start updating.
Type 2: Updating Via FTP Server
Updating via FTP server is supported. Make sure there is an available FTP server.
① Type the FTP Server IP address, like the right figure
② Type the port the FTP server used.
③ Type the user name and password to access the FTP
server.
④ Copy the name of the firmware.
⑤ Click to start updating.
Type 3: Updating Via TFTP Server
Updating via TFTP server is supported. Make sure there is an available TFTP server.
① Type the TFTP Server IP address in the field.
② Copy the name of the firmware.
③ Click to start updating.